Euclid Aquaseal LVS is a three-component, low-viscosity epoxy grout system designed for structural pile encapsulation in marine environments. Each kit includes a pre-measured blend of 100% solids epoxy resin, hardener, and graded silica aggregate. With excellent flow characteristics and strong bonding to concrete and steel, this system is ideal for applications above and below the waterline. Whether you’re working on piers, bridge columns, or offshore rigs, it delivers high-performance repair in tough marine conditions.
Key Features Aquaseal LVS
- Engineered for Marine Use
Suitable for both freshwater and saltwater exposure, including splash zone applications. - Low Viscosity for High Flow
Easily fills annular spaces in pile jackets with minimal effort. - Strong Structural Performance
Reaches 8,000 psi compressive strength and 2,500 psi shear bond strength on concrete failure. - Durable and Moisture Resistant
Water absorption under 0.40% ensures long-term protection. - Extended Working Time
Gel time of 45 to 60 minutes at 75°F allows for large-volume placement without rush. - Simple Kit Format
Packaged in 2.0 cubic foot kits with clearly labeled components for fast, consistent jobsite mixing.
✨ Don’t hesitate to give us a call!
We’re here to answer all of your questions about Euclid Aquaseal LVS, or any of the other products we carry.
Recommended Uses for Aquaseal LVS
Aquaseal LVS is recommended for structural reinforcement and protection of pilings and supports exposed to harsh marine conditions. Its low-viscosity formulation ensures easy placement around rebar and within confined areas of FRP jackets.
- Pile repairs above and below waterline
- Bridge column encapsulation
- Wharf and dock structure stabilization
- Offshore platform maintenance
- Jetty and breakwater reinforcement
Frequently Asked Questions
What makes Aquaseal LVS suitable for underwater applications?
It is 100% solids, moisture-tolerant, and has low water absorption, making it ideal for pile encapsulation in marine conditions.
How long do I have to work once mixed?
At 75°F, the gel time is approximately 45 to 60 minutes, giving ample working time for placement.
What is the compressive strength of Aquaseal LVS once cured?
It delivers 8,000 psi compressive strength (ASTM C109) and 2,500 psi shear bond strength (ASTM C882).
What packaging is included in one unit?
Each 2.0 ft³ unit includes 3 gallons of Part A (resin), 2 gallons of Part B (hardener), and four 55-lb bags of aggregate.
Can Aquaseal LVS be used in cold conditions?
Application should not begin below 50°F water temperature. Condition the material to 70°F for optimal results.
How is Aquaseal LVS placed?
Once mixed, the grout is poured into the FRP jacket via a headbox to fill the annular space. Initial cure occurs within 8 to 10 hours.
