Stratarock Deep Pour Epoxy Grout High Flow is a high-strength, three-component epoxy system designed for deep-pour industrial grouting. It supports heavy-duty placements under large machinery, structural baseplates, and equipment foundations with accuracy and consistency.
Because of its enhanced flow characteristics, the grout moves easily through tight clearances and across long distances. You can pour up to 9 inches in a single lift while maintaining reliable performance. It resists dynamic loads, repeated impact, and chemical exposure, making it a strong choice for demanding environments.
The system delivers high compressive strength, low shrinkage, and strong adhesion to both concrete and steel. As a result, it improves alignment, cuts future maintenance needs, and adds long-term stability to critical structural installations.
Key Features of Stratarock Deep Pour Epoxy Grout – High Flow
- High-flow formulation enables long-distance pours and fits tight-clearance spaces
- Delivers 8,000 psi compressive strength in 24 hours and reaches 15,500 psi at full cure
- Resists vibration, impact, torque, and other mechanical stresses
- Sets quickly with low shrinkage to maintain long-term alignment and stability
- Provides strong resistance to chemicals and corrosion in harsh industrial settings
- Meets USDA standards for incidental food contact
Recommended Uses for Stratarock Deep Pour Epoxy Grout – High Flow
Stratarock Deep Pour Epoxy Grout High Flow works well for industrial maintenance and repair applications where precision, durability, and deep placement matter. It supports heavy machinery, baseplates, and structural components exposed to harsh conditions. When pour depths exceed ¾ inch or when pumpable, long-distance flow is required, this grout delivers reliable performance.
Common Applications:
- Equipment bases and machine beds
- Wind turbine and tower foundations
- Fans, blowers, and rotating equipment
- Foundation rebuilding and reinforcement
- Crane rails and heavy track systems
- Installations with vibration or thermal movement
- Chemical processing and corrosive environments
Frequently Asked Questions
What is the maximum pour depth for Stratarock Deep Pour Epoxy Grout – High Flow?
You can pour up to 9 inches in a single lift. For deeper applications, contact Indcon for technical recommendations.
How long before equipment can be set in place?
At 70°F, the grout sets in about 24 hours. Full cure typically takes 5 to 7 days.
Can it be used in cold weather?
Yes, but you need to control the temperature. Keep both the grout and the substrate at or above 70°F. Use shelters or heating equipment when working in cold conditions.
Is it suitable for food processing areas?
Yes. The grout is USDA approved for incidental food contact.
How should surfaces be prepared before grouting?
Mechanically abrade concrete and remove all dust and contaminants. Whenever possible, sandblast steel surfaces. Make sure all substrates are clean and dry.
Is it pumpable?
Absolutely. Its high-flow formulation allows pumpable placement over long distances and into tight-clearance spaces.
