Stratarock Liquid Flow Epoxy Grout is a 100% solids, high-performance epoxy designed for precision grouting, anchoring, and equipment regrouting in demanding industrial environments. Thanks to its ultra-low viscosity, the grout flows easily into narrow spaces and long pour distances, making it especially useful where clearance is tight or access is limited.
Unlike traditional grouts that may require vibration or extensive finishing, this self-leveling formula fills voids cleanly while minimizing air entrapment. As a result, it simplifies placement under wide machine bases, sole plates, or other large equipment foundations.
Once cured, the grout delivers strong mechanical performance. It resists vibration and absorbs impact without cracking or shifting, even under heavy dynamic loads. Additionally, it withstands exposure to oils, fuels, and other common industrial chemicals—making it well-suited for harsh service conditions.
Installation crews benefit from its forgiving prep requirements. Because it bonds well to clean, sound substrates with only minimal surface preparation, crews can reduce labor time without compromising results. The grout also sets quickly, helping minimize downtime and keep projects on schedule.
Altogether, Stratarock Liquid Flow Epoxy Grout offers a dependable solution for maintenance teams and contractors who need strength, flow, and chemical resistance in one clean, easy-to-place system.
✨ Don’t hesitate to give us a call!
We’re here to answer all of your questions about Stratarock Liquid Flow Epoxy Grout, or any of the other products we carry.
Key Features of Stratarock Liquid Flow Epoxy Grout
-
Maximum Flowability
Its ultra-low viscosity allows the grout to move easily through tight spaces and beneath machine bases, ensuring full coverage in restricted clearances. -
High Early and Ultimate Strength
It reaches 9,000 psi compressive strength within 24 hours and achieves up to 13,000 psi at full cure, supporting quick return to service and long-term durability. -
Excellent Chemical Resistance
The cured material resists exposure to most industrial chemicals, including oils, fuels, and solvents—making it suitable for harsh environments. -
Impact and Vibration Tolerant
Stratarock maintains structural integrity even under dynamic loads, which makes it ideal for equipment subjected to vibration or repeated impact. -
Moisture Insensitive
Because it cures effectively in humid conditions and on damp surfaces, it’s reliable in less-than-ideal jobsite environments. -
Fast Setting with Minimal Shrinkage
The grout begins setting in as little as 5 to 7 hours. Its low-shrinkage formulation helps preserve alignment and stability during cure.
Recommended Uses for Stratarock Liquid Flow Epoxy Grout
Stratarock Liquid Flow Epoxy Grout is well suited for maintenance crews and plant personnel handling baseplate installations or precision equipment alignment—especially in areas exposed to chemicals or constant vibration. Its self-leveling flow and long placement reach help reduce labor and speed up installation, even when access is limited.
Typical applications include:
- Setting baseplates for pumps, compressors, and turbines
- Anchoring bolts, dowels, or embedded hardware
- Rebuilding and leveling deteriorated grout beds
- Supporting crane rails in heavy industrial settings
- Aligning torque-loaded or vibration-sensitive equipment
- Grouting foundations in chemical splash zones
Frequently Asked Questions
What is the working time once the components are mixed?
At 77°F, the pot life is approximately 30 minutes. To extend this slightly, swirl the mix to reduce internal heat buildup.
How far will Liquid Flow Epoxy Grout flow under a baseplate?
With a 3-inch head and a ¼–½ inch clearance, the grout can flow up to 4 feet. This makes it suitable for extended placements beneath large equipment.
What are the curing times?
Initial set takes place within 5 to 7 hours. In most conditions, the grout is service-ready after 24 to 48 hours. Full cure typically occurs in 5 to 7 days, depending on ambient temperature.
Can Liquid Flow Epoxy Grout be used in low-clearance installations?
Yes. The formulation is specifically designed for high flow in clearances up to ½ inch, making it ideal for tight equipment settings.
Is special surface preparation required?
Surfaces must be clean and free of weak or loose material. For steel, use a roughened profile and wipe down with solvent. Always treat formwork with a wax-type release agent to ensure clean removal.
